Seba FR1 Striker Skate

A coulple of problems with the FR1 boot with the Striker 4x90 frame.

One, Seba stopped selling FR1 boots only and have moved to selling the FR1 in a complete skate only.

Second, Luigino changed their Striker frame.

The problem is, the new Striker frame mounting slots are narrower then the old Striker frame mounting slots.

The Striker frame mounting slots need to be filed 1mm to fit the larger Seba boot bolts.

So you have 2 choices.

1: Get an FR1 complete with a Seba 4x90 frame on it:

https://www.nettracing.com/fr1-90-black-skate.htm

2: Get the cheaper FR1 4x80 complete skate and take the Seba 4x80 frame off of it and put on the 4x90 Striker frame and 90mm Matrix wheels:

https://www.nettracing.com/fr1-80-black-skate.htm

https://www.nettracing.com/atom-matrix-green-wheels.htm

The FR1 boot with the Striker 4x90/3x110 frame is my favorite boot-frame setup.

But, you do have to widen the Striker frame slots 1mm to make them fit.

If you don't feel you can file 1mm out of the Striker frame slot, then you may have to look at the FR1 complete with the Seba 4x90 frame.

But, this is my favorite setup, a comfort boot (FR1) on a speed frame (Striker 4x90/3x110) wheel (Atom Matrix) and bearing (Bionic Abec 7, Swiss).